Flightmed archive for January-2003

Flightmed archive for January-2003
|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Transport IV pumps
I'd echo most of the comments below.... I've been using IVACs for three
years or so... both ground CCT calls and now in flight.
One addition to the "cons" list: It has been my experience that the IVAC
doesn't like Diprovan very much... perhaps the viscosity of the fluid.
Regardless, every time I've had Diprovan on a drip, the IVAC would
constantly alarm at me.
Other than that, good pumps.
------------
JRB
Jeff Brosius,
Flight Medic, etc.
Augusta, GA
www.prehospital-perspective.com
brosius@prehospital-perspective.com
"Performance is your reality. Forget everything ele." -- Harold Geneen
>
>We use the IVAC 3 channel pumps... they are great as they are small, have a
>med calculator built in (optional) and have a decent alarm system as well.
>To top it off they are fairly inexpensive, we purchased refurbished units
>for around $600 a piece from PMI. You can also get customized protective
>covers to identify your units and giving some PR along with it. They are
>intuitive to use as well. If you have more then 3 drips/fluids running you
>can just grab another pump and keep the chain going without taking up a lot
>of space. These units clamp easily to the cot rails and can be laid on top
>of the patient temporarily without causing a crushing injury ;-).
>
>Cons: the little plastic hooks for the IV bag/bottle break off easily. We
>also do not have Biomed available to us easily, so any problems means out
>of service for that unit. Depending on which tubing you purchase, they can
>be a little cumbersome. Some half sets will alarm if used with certain
>brands of the regular IV tubing... 60 drop sets will for sure do this but
>has happened also with some 10 drop sets. The last con I can think of is
>related to piggybacking and their tubing... seems to me that they could
>make it easier to piggyback, particularly with the NTG tubing, when you
>have such low flow rates and a mainline is a necessity... if you do not use
>one of the pump channels for this, and just want to drip your own fluid,
>you will have to add an additional adaptor otherwise you will lose your
>needless port. A second needless port would solve this problem I think.
_________________________________________________________________
The new MSN 8 is here: Try it free* for 2 months
http://join.msn.com/?page=dept/dialup
_______________________________________________
Flightmed mailing list
To unsubscribe or change your email address, go to http://www.pairlist.net/mailman/listinfo/flightmed
[ Home |
Archive |
Classifieds |
Links |
Resources |
White Pages ]

© 2000 -- Website created by
Rollie Parrish |
Credits |
Last modified: 01/06/03